HOME > Product Category > Chukoh Ptfe Products > Chukoh Flo; Adhesive Tape

Chukoh Flo; Adhesive Tape
Typical dimensions of ADHESIVE TAPES
Product No. Thickness (mm) Width (mm) Length (m)
AGF-100 0.13 13,19,25,30,38,50,100,
150,200,250,300,450		 10
0.15
0.18
0.30
AGF-100A 0.13 13,19,25,38,50,100,
150,200,250,300,450		 10
0.15
0.18
0.30
ASF-110 0.08 13,19,25,38,50,
100,200,250,300		 10
0.13
0.18
0.23
AGF-400-3 0.12 1000(Maximum) 10
AGF-500-3 0.13
AGF-400-4 0.14
AGF-500-4 0.15
AGF-400-6 0.17
AGF-500-6 0.18
AGF-400-10 0.29
AGF-500-10 0.30
AGF-500-6 0.18
API-114 0.06 450(Maximum) 20
0.08 100
AUE-112 0.18 300(Maximum) 40
0.30 20
0.55
Please contact us concerning sizes not mentioned above.
Typical properties
Product No. Thickness (mm) Tensile strength (N/25mm) Elongation (%) Adhesive peel strength at peel direction of 180¢X Dielectric strength of substrate (kV)
AGF-500-3 0.13 259.7 - 8.82 2.5
AGF-500-6 0.18 602.7 - 10.78 3.5
AGF-100 0.13 259.7 - 8.82 2.5
0.18 602.7 - 10.78 3.5
AGF-100A 0.13 259.7 - 8.23 2.5
ASF-110 0.08 56.4 150 6.57 7.6
0.13 90.6 200 7.15 10.2
0.18 125.0 200 8.33 11.9
API-114 0.06 98 60 6.20 5
0.08 196 60 7.40 7
AUE-112 0.30 245 300 9.80 21
Values of properties in the table are typical, not guaranteed.

The surface of the tapes are non-sticky. Release paper, coming with this type of adhesive tape, makes it easier to cover large diameter rolls with the tapes.
Typical dimensions of ADHESIVE TAPES
Product No. Thickness (mm) Width (mm) Length (m)
AGF-100 0.13 13,19,25,30,38,50,100,
150,200,250,300,450		 10
0.15
0.18
0.30
AGF-100A 0.13 13,19,25,38,50,100,
150,200,250,300,450		 10
0.15
0.18
0.30
ASF-110 0.08 13,19,25,38,50,
100,200,250,300		 10
0.13
0.18
0.23
AGF-400-3 0.12 1000(Maximum) 10
AGF-500-3 0.13
AGF-400-4 0.14
AGF-500-4 0.15
AGF-400-6 0.17
AGF-500-6 0.18
AGF-400-10 0.29
AGF-500-10 0.30
AGF-500-6 0.18
API-114 0.06 450(Maximum) 20
0.08 100
AUE-112 0.18 300(Maximum) 40
0.30 20
0.55
Please contact us concerning sizes not mentioned above.
Typical properties
Product No. Thickness (mm) Tensile strength (N/25mm) Elongation (%) Adhesive peel strength at peel direction of 180¢X Dielectric strength of substrate (kV)
AGF-500-3 0.13 259.7 - 8.82 2.5
AGF-500-6 0.18 602.7 - 10.78 3.5
AGF-100 0.13 259.7 - 8.82 2.5
0.18 602.7 - 10.78 3.5
AGF-100A 0.13 259.7 - 8.23 2.5
ASF-110 0.08 56.4 150 6.57 7.6
0.13 90.6 200 7.15 10.2
0.18 125.0 200 8.33 11.9
API-114 0.06 98 60 6.20 5
0.08 196 60 7.40 7
AUE-112 0.30 245 300 9.80 21
Values of properties in the table are typical, not guaranteed.
API-114
The substrate of this type of tapes is the polyimide resin film.
Uses : electrical insulation materials for various kinds of equipment.		 AUE-112
The substrate of this type of tapes is the ultra-high molecular weight polyethylene resin film.
Uses : abrasion-preventing covering for hoppers of sand, sugar and grain as well as silos/slide-improving coverings for the sliding surface of skis and snow-boards as well paper transferring parts of fax machines.