HOME > Product Category > Self-Fusing Butyl Rubber Tape) > TA Series Rubber Splicing Tape

TA Series Rubber Splicing Tape
Description:
TA Series Rubber Splicing Tape is a highly conformable, self-fusing Ethylene Propylene Rubber (EPR) based high-insulating voltage tape

Character:
Excellent weather-resistance and insulation.
High heat conduction.
Excellent viscosity, filling and self-bonding character on irregular surface.
Combustion-resistance.
Excellent gluing to brass, aluminum and cable coating
Compatible with all solid dielectric cable insulation1.Polyethylene (high and low density)2.Cross-linked polyethylene 3.PVC4.Butyl rubber5.EPR

Measure
Length / roll¡G305cm ¡Ó 2cm
Width¡G0.85mm ¡Ó 0.1mm
Thickness¡G0.5mm ¡Ó 0.1mm

This company product specification all may depend on your demand ordering
The inspection report of TA Series Rubber Splicing Tape
Elongation

>1000%
Breaking strength

>2kg
Insulation resistance
1 ¡Ñ 106 M£[+
60Hz Ac Withstand

>AC 60Hz 25KV+
Stability Test

No detachment through 130¢Jafter 100 hours.
No punching through upon adding AC 2.2KV+ 1 min. and through 130¢J after 100 hours.

Applicable

The electric insulation of bus under 1000V.
Erosion-resist coating treatment of the T shape or irregular type connector on high/low voltage bus.
The general operation temperature is kept at 90¢J, but under emergency the temperature may go up to *130¢J for 100 hours.
The coating treatment of the suspending cable.